Portable Power Quality Analyzer / Portable Data and Event Logger
The EDL175 portable power quality analyzer and event and data recorder can conveniently measure, record, and analyze various electrical parameters and events. It is easy to carry, improving the efficiency of on-site power fault diagnosis.
The EDL175 has a wide range of applications, such as event analysis, energy auditing, and load curve recording.
The EDL175, combined with PAS software, can achieve powerful data graphical display and analysis functions.
The EDL175 can directly measure voltages up to 660V (higher voltages can be measured through PT). The product comes with a standard current clamp (secondary current of 1A) and optionally supports FLEX flexible transformers or standard current clamps with secondary voltages of 2VAC or 3VAC.
The EDL175 can accurately measure low currents from 100mA to 10A.
The EDL175 is equipped with a built-in DC battery to ensure normal operation during short power outages.
The EDL175 has a built-in powerful PM175 power quality analyzer, so it possesses all the measurement, analysis, and recording functions of the PM175.
- Commodity name： Portable Power Quality Analyzer / Portable Data and Event Logger
- Commodity ID： EDL
- Product Description
- Summary
-
Basic Functions
Measurement
■ 0.2S Class Accuracy IEC62503-22:2003
■ 128 times/cycle True RMS Measurement
■ Four-Quadrant Measurement
■ Current (including neutral line current), voltage, power, energy, power factor, frequency, unbalance, load curve, demand
■ Built-in multi-rate time-of-use (TOU) pricing to meet any billing requirements
■ Sealing Options
Harmonic Analysis
■ Current, voltage total harmonic distortion THD, total demand distortion current TDD, K factor
■ 50th order harmonic analysis
■ Harmonic power flow calculation (harmonic direction)
■ Up to 50th order interharmonics voltage
■ Harmonic spectrum and phase angle
■ Harmonic standard compliance analysis IEEE1159, G5/4
Waveform Recording
■ 2 independent, synchronized waveform recorders, each including 3-phase current and 3-phase voltage waveforms
■ Recording resolution adjustable from 32 to 128 times/cycle
■ 16 cycles pre-fault recording, up to 2000 cycles post-fault recording
■ Supports programmable storage partitions
Event Recording
■ Programmable event recording with 1ms timestamp
■ Supports programmable storage partitions
Data Recording
■ Up to 16 programmable data recording tables, each with up to 16 parameters
■ Recording interval adjustable from 1 to 9999 seconds
■ Supports programmable storage partitions
EN50160 Power Quality Recorder
■ EN50160 compliance statistics
■ EN50160 harmonic statistics
■ Onboard power quality analyzer
■ Programmable thresholds and delays
■ Custom reports
■ IEEE519 Power Quality
Customized EN50160 Power Quality Recorder
Flicker: IEC61000
Transient Recording
■ Minimum width: 156μs @ 50Hz
Sag/Swell Monitoring
Real-Time Clock
■ 30ppm real-time clock
■ GPS pulse input time synchronization
Storage
■ 1M non-volatile memory
■ Programmable partitioning for event, data, and waveform recording storage
Control Options
■ 2 relay outputs DO, 4 digital inputs DI, 4 analog inputs AI, up to 16 analog outputs AO
Communication
■ 2 communication ports:
■ COM1: RS232/244/485, 56K MODEM, Ethernet 10/100 Base T
■ COM2: RS422/485 (standard)
-
The EDL175 portable power quality analyzer and event and data recorder can conveniently measure, record, and analyze various electrical parameters and events. It is easy to carry, improving the efficiency of on-site power fault diagnosis.
The EDL175 has a wide range of applications, such as event analysis, energy auditing, and load curve recording.
The EDL175, combined with PAS software, can achieve powerful data graphical display and analysis functions.
The EDL175 can directly measure voltages up to 660V (higher voltages can be measured through PT). The product comes with a standard current clamp (secondary current of 1A) and optionally supports FLEX flexible transformers or standard current clamps with secondary voltages of 2VAC or 3VAC.
The EDL175 can accurately measure low currents from 100mA to 10A.
The EDL175 is equipped with a built-in DC battery to ensure normal operation during short power outages.
The EDL175 has a built-in powerful PM175 power quality analyzer, so it possesses all the measurement, analysis, and recording functions of the PM175.
Keywords:
Get a Quote
Note: Please leave your contact information, our professionals will contact you as soon as possible!
Continuously creating greater value for customers
Providing you with competitive products
* If you have any questions, please contact us!
Contact us now, unlimited possibilities start from the first communication!